Products

Hand-Driven Chaff Cutter

Features

  • Mounted on Steel Legs & Braces, with forged feet, makes the machine easily bolted on the floor.
  • Width of rising mouth 8 1/4".
  • Diameter of fly wheel 36" or 42" or 47" (as desired or applicable).
  • The worm and gear are made from machined patterns, which makes the machine easy running and free from excessive friction.
  • Blades of Indian makes can be supplied with the machine with additional cost.
  • Machine is supplied with Iron Chute.
  • A set of 3 pieces of double ended Open Jaw spanners, Drop Forged steel duly hardened and handle.


Specifications for Various Models:

Type of Worm Thread Output Chaff Length (Inches) Number of Gear Teeth
Single & Double Thread 5/8'' to 1 1/4'' 11
1/2'' to 1'' 13
7/16'' to 7/8'' 15
3/8'' to 5/8'' 18
Single Thread 5/8'' 11
7/16'' 15
1/2'' 13

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Hand & Power Driven Chaff Cutter

Features

  • One Horse Power single Phase motor (1440 RPM) operates with machine easily.
  • Mounted on steel legs & Braces, with forged feet makes the machine easily bolted to the floor.
  • Width of rising mouth 8 1/4".
  • Diameter of fly wheel 36" with v-grove.
  • The worm and gear are made from machined patterns, which makes the machine easy running and free from excessive friction.
  • Blades of Indian makes can be supplied with the machine with additional cost.
  • Machine is supplied with Iron Chute.
  • Machine is supplied with IRON Chute, Spanners (set of three), Double ended open jaw spanners drop forged steel duly hardened-belt pulley for motor shaft, Cast iron foundation plate for motor base and V-belt no.B-118.
  • Out put per hour (average):
    Green Fodder 10 to 11 Qts.
    Dry fodder 8 to 10 Qts.

Specifications for Various Models:

Type of Worm Thread Output Chaff Length (Inches) Number of Gear Teeth
Single & Double Thread 5/8'' to 1 1/4'' 11
1/2'' to 1'' 13
7/16'' to 7/8'' 15
3/8'' to 5/8'' 18
Single Thread 5/8'' 11
7/16'' 15
1/2'' 13

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Light-Power Driven Chaff Cutter

Features

  • Works on 2 H.P. Single Phase Motor.
  • Mounted on Steel Legs & Braces, with forged feet, makes the machine easily bolted on the floor.
  • Width of rising mouth 9".
  • The worm and gear are made from machined patterns, which makes the machine easy running and free from excessive friction.
  • Machine is supplied with Iron feeding Chute, 22" machine pulley, nuts, bolts, Grease Cup and a Spanner Set. (Set of 3 Pcs.)
  • Net Weight of Machine 160 Kg. (Approximately)
  • Output per hour (average) 1200kg. to 1500kg.


Optional

Blades of Indian make, Electric Motor, Motor Stand, Wheel Cover, Safety Guard & V-belts can be Supplied with the Machine at additional cost.

Specifications for Various Models:

Type of Worm Thread Output Chaff Length (Inches) Number of Gear Teeth
Single & Double Thread 5/8'' to 1 1/4'' 11
1/2'' to 1'' 13
7/16'' to 7/8'' 15
3/8'' to 5/8'' 18
Single Thread 5/8'' 11
7/16'' 15
1/2'' 13

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Steel Geared Power Driven Chaff Cutter

Description

The Kisancom Toka Steel Geared type is fitted on Heavy Angle Iron Frame which is mounted on Heavy angle legs and braces, with forged feed, which enable the machine to be easily bolted to the ground. The bevel pinion gear system is used. Because of this system you you can change the motions (Reverse & Forward) instantly. This is a great advantage to machine as well as chocking of the machine. Length of cut can be changed with gear lever instantly. All gear are duly hardened. The main shaft of the machine is fitted with bearing.

Technical Data

  • Works on 2 H.P. Single Phase Motor
  • Output 1200 Kgs. to 1500 Kgs. Per Hour
  • Length of cut 3/8'' to 1/2'' and 1/2'' to 5/8''
  • 300 to 350 RPM required
  • Before starting the machine, fill the main gear box with 200 to 250 ml. Lubricating Oil Number 90 and the Outer gear box with 100 to 150 ml. Lubricating Oil Number 90.
  • Always keep the blades sharp. Keep a distance of 1/16'' or 1.5mm between blades and mouth piece.
  • You can chaff Sugarcane, Jawar, Maize, Barseen both dry and green.

Accessories Supplied with the Machine

  • Iron Feeding Chute with safety measures.
  • 22'' Machine Pulley.
  • Nut & Bolts and Grease Cup.
  • A set of 3 pieces of double ended Open Jaw spanners, Drop Forged steel duly hardened.
  • Wheel Cover.

Optional

Electric Motor, Motor Stand, Safety Guard, V-Belt & Blades can be supplied with machine at additional cost.

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Featured PoductSteel Geared Power Driven Chaff Cutter with Upward Blower

Description

The KISANCOM Heavy Duty Upward Blower type chaff-cutter is mainly developed for commercial use and for dairy farms with 100 or more animals. The chassis of the machine is moulded. It is fitted on strong Heavy Angle legs and braces, with forged feet, which enable the machine to be bolted to the ground. Wheels can be fit onto the legs to make the machine portable .The bevel pinion gear system is used; Because of this system you can change the motion (Reverse, Forward) instantly. This is a great advantage for the machine operator.
It prevents unnecessary accidents and also acts as a safety device.All gears are machine cut steel gears duly hardened.Length of cut can easily be changed with the gear leaver provided. The main shaft of the machine is fit with two anti-friction bearings. The gear box and the outer gear box of the machine in fit with. Six fan blades are fit on the fly wheel which throws the chaffed material 12 - 15 feet away from the machine.

Technical Data

  • Operates on a 7 H.P. electric motor or any Diesel Engine of the same power.
  • Output 3000 kgs. To 3500 kgs. Per Hour.
  • Length of cut 3/8'' to 1/2'' and 1/2'' to 5/8''
  • 500 to 550 RPM required
  • Before starting the machine, fill the main gear box with 200 to 250 ml. Lubricating Oil Number 90 and the Outer gear box with 100 to 150 ml. Lubricating Oil Number 90.
  • Always keep the blades sharp. Keep a distance of 1/16'' or 1.5mm between blades and mouth piece.
  • You can chaff Sugarcane, Jawar, Maize, Barseen both dry and green.

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Featured PoductSteel Geared Power Driven Chaff Cutter with Downward Blower

Description

The KISANCOM Heavy Duty Downward Blower type chaff-cutter is mainly developed for commercial use and for dairy with 100 or more animals. The chassis of this machine is moulded. And it is fit on Heavy Angle legs and braces, with forged feet. This enables the machine to be bolted to the ground. Wheels can be fit onto the legs to make the machine portable.
The bevel pinion gear system is used; Because of this system you can change the motion (Reverse, Forward) instantly. This is a great advantage for the machine operator.
It prevents unnecessary accidents and also acts as a safety device. All gears are machine cut steel gears duly hardened. Length of the cut can easily be changed with the gear leaver. The main shafts of the machine is fit with two anti-friction bearings. The gear box and outer box of the machine are fitted with bearings. Six fan blades are fit on the fly wheel which throws the chaffed material away from the machine.

Technical Data

  • Operates on a 7 H.P. electric motor or any Diesel Engine of the same power.
  • Output 3000 kgs. To 3500 kgs. Per Hour.
  • Length of cut 3/8'' to 1/2'' and 1/2'' to 5/8''
  • 500 to 550 RPM required
  • Before starting the machine, fill the main gear box with 200 to 250 ml. Lubricating Oil Number 90 and the Outer gear box with 100 to 150 ml. Lubricating Oil Number 90.
  • Always keep the blades sharp. Keep a distance of 1/16'' or 1.5mm between blades and mouth piece.
  • You can chaff Sugarcane, Jawar, Maize, Barseen both dry and green.

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Featured PoductTractor Driven Chaff Cutter with Upward and Downward Blower

Description

The Kisancom Tractor Driven Chaff-cutter is a blower type machine which has been developed for commercial use. This machine is fit on a chassis driven on tyres, which is attached with a hook to the tractor.
The bevel pinion gear system is used; Because of this system you can change the motion (Reverse, Forward) instantly. This is a great advantage for the machine operator.
All gears are machine cut steel gears duly hardened. Length of cut can easily be changed with the gear leaver provided. The main Shaft of the machine is fit with two anti-friction bearings. The gear box and outer box of the machine is fit with the bearings.
The fly wheel of the machine has six fan blades that throw the chaffed material into the trolley which can be attached to the machine.
The machine is attached to the tractor with a P.T.O shaft. Therefore the machine can be operated while on the move.

Technical Data

  • Works with any tractor through P.T.O shaft.
  • Output: 3500Kgs - 4000Kgs. Per Hour
  • R.P.M required is 500 to 550.
  • Before starting the machine, fill the main gear box with 200 to 250 ml. Lubricating Oil Number 90 and the Outer gear box with 100 to 150 ml. Lubricating Oil Number 90.
  • Always keep the blades sharp. Keep a distance of 1/16'' or 1.5mm between blades and mouth piece.
  • You can chaff Sugarcane, Jawar, Maize, Barseen both dry and green.

Call Us, Email Us or Use Contact Page to Leave a Message for any Further Information Regarding Product or Trade/Sales Enquires.


Our high quality ISO approved range of products to suit the needs of various prospective customers is as follows:

Hand-Driven Chaff Cutter

The Kisancom Hand Driven Chaff-Cutter is one of our classical product has been a best seller for customers with smaller needs on their farms. The machine is mounted on steel legs with forged feet.

+ More Info.

Hand & Power Driven Chaff Cutter

The Kisancom Power and Hand Driven Chaff-Cutter is introduced as export model as an answer to needs of worldwide small farms and quality standards. The machine includes safety features as standard.

+ More Info.

Light-Power Driven Chaff Cutter

The Kisancom Light Power chaff cutter is mounted on strong steel legs with forged feet. The rising mouth with three feeding rollers which are driven by a worm and two gears. The wriving worm is on shaft supported by bearings.

+ More Info.

Steel Geared Power Driven Chaff Cutter

The Kisancom Toka Steel Geared type is fitted on Heavy Angle Iron Frame which is mounted on Heavy angle legs and braces, with forged feet that enables the machine to be easily bolted to the ground.

+ More Info.

Featured Poduct

Steel Geared Power Driven Chaff Cutter with Upward Blower

The Kisancom Heavy Duty Upward Blower Steel Gear Machine is mainly developed for commercial use and for dairy with 100 or more animals. The machine is fitted on heavy angle iron frame that is mounted on heavy angle legs and braces, with forged feet.

+ More Info.

Featured Poduct

Steel Geared Power Driven Chaff Cutter with Downward Blower

The Kisancom Heavy Duty Downward Blower Steel Gear Machine is mainly developed for commercial use and for dairy with 100 or more animals. The machine is fitted on heavy angle iron frame that is mounted on heavy angle legs and braces, with forged feet.

+ More Info.

Featured Poduct

Tractor Driven Chaff Cutter with Upward and Downward Blower

The Kisancom Tractor Driven Chaff-cutter is a blower type machine which has been developed for commercial use. This machine is fit on a chassis driven on tyres, which is attached with a hook to the tractor.

+ More Info.

Request Catalogue